FOR A SIMPLE NO HASSLE SHOPPING CART WITH ACCURATE SHIPPING
COOL AND FREE
START BUILDING A FREE SITE NOW
Copyright ©2010-2011 Garage Toyz
Technical Highlights | The most technically advanced oil filter you can buy.Consistent filtering across entire filter surfaceSuperior ASTMF316 filtration performance7 times the flow of comparable paper oil filtersMagnetic PrefilteringBillet aluminum filter case doubles as an oil coolerProgressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpmNo more cutting apart messy paper filters for trapped debris inspectionProven in Motorsports, Military and Aerospace applications for yearsNo more oily paper filters to the landfillsMay be the last oil filter you'll buy "Inspect, Clean, Reuse" |
| Unique Design, Top Quality Materials and ConstructionThe K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of a solid chunk of 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat. | |
| HARLEY DAVIDSON | ||
| Dyna Evo | 91-98 | S4 |
| Dyna Twin Cam | 99-11 | S4 |
| Softail Evo | 84-99 | S4 |
| Softail Twin Cam | 00-11 | S4 |
| Sportster | 85-11 | S4 |
| Touring Evo | 82-98 | S4 |
| Touring Twin Cam | 99-11 | S4 |
| Trike | 10,11 | S4 |
| VRSC V-Rod /Muscle | 02-11 | S10 |
| Various models,"Shorty"filter | 80-86 | S5 |
| 3/4 X 16 thread custom or remote mounts | S4 | |
| 13/16X16 thread custom or remote mounts | S10 | |
| 16mm thread custom or remote mounts | S5 | |
Ensure quad ring is fully seated in housing groove and lube with clean oil before installation. Quad ring can be normally be used for several oil changes. Included cup wrench fits over machined flats on bottom cooling fin. Torque filter to either factory specs or 18-20 lb ft, whichever is less. |
Stainless Steel Micronic Oil Filters
MSRP USD
Billet $149
Billet $149
Anodized $154
Anodized Diamond Cut $203
Powder Coat $164
Powder Coat Diamond Cut $213
Polished $174
Polished Diamond Cut $223
Chrome $174
Part # S4
In addition to fitting the Ducati, this filter is also used to replace the "shorty" filter used on somel remote mount units sold for V-Twins. |
Ensure quad ring is fully seated in housing groove and lube with clean oil before installation. Quad ring can be normally be used for several oil changes. Included cup wrench fits over machined flats on bottom cooling fin. Torque filter to either factory specs or 18-20 lb ft, whichever is less. |
Stainless Steel Micronic Oil Filters
Part # S5
MSRP USD
Billet $149
Anodized $154
Chrome $174
In addition to fitting the Ducati, this filter is also used to replace the "shorty" filter used on somel remote mount units sold for V-Twins. |
Ensure quad ring is fully seated in housing groove and lube with clean oil before installation. Quad ring can be normally be used for several oil changes. Included cup wrench fits over machined flats on bottom cooling fin. Torque filter to either factory specs or 18-20 lb ft, whichever is less. |
Part # S10
| MSRP USD Billet $149 Anodized $154 Chrome $174 S10 PARTS LIST
| ||||||||||
Left to Right: Machine Finish, Titanium Color Anodized, Black Anodized, Chrome, Polished Diamond Cut, Black Anodized Diamond Cut.
Not all fnishes are available on all filters.
K&P OFFERS OIL FILTERS FOR ALMOST EVERYTHING, DUE TO THAT ITS ALMOST IMPOSSIBLE TO LIST THEM ALL. PLEASE CLICK ON THE LINK BELOW AND FIND THE FILTER FOR YOUR APPLICATION AND GO TO OUR CONTACT PAGE ,AND ENTER THE PART NUMBER AND MAKE AND MODEL OF YOUR VEHICLE, AND WE WILL CONTACT YOU ABOUT PURCHASING.
